Content:

Description

---

This Readme file provides specific installation instructions and other information you should know before you perform a firmware upgrade for your HP Series MFP. Installation instructions are provided for Single and Multiple Printer Updates.

The HP Printer Remote Firmware Upgrade file available from the hp web site contains firmware for the printer, embedded JetDirect (if applicable), HP paper handling accessories used with the device in one convenient download file. When the Remote Firmware Upgrade file is sent to the HP MFP firmware for the engine and all connected accessories are upgraded.

Similar to Hewlett Packard providing improved software for your HP MFP, Hewlett Packard provides firmware updates for your printer periodically through its supported lifecycle. A firmware update may be necessary if it is determined that you may benefit from the resolution of any issue that is documented below. These updates are available on the HP support web site.

NOTE: If you are using a third-party application on your HP CM8060/CM8050 Color MFP, contact the application vendor before updating the firmware to see if your application(s) have been qualified with this firmware release.

To determine the current level of firmware installed on the device:

1. Go to the MFP's control panel.
2. Press the "Administration" Icon on the touch screen.
3. Select the "Information"" selection on the touch screen.
4. Select "Configuration Page".
5. Select the "Print" button.

On the printed Configuration Page look in the section marked "Device Information" for the "Firmware Datecode". The firmware datecode will look something like this: 20070824 72.024.0
Download: